Hengshui Zhehan Rubber & Plastic Products Co., Ltd. has been manufacturing industrial rubber hoses for years, with a strong focus on steam, hot water, and high-temperature fluid transfer. This High-temperature Resistant Industrial Steam Hose was developed from direct, on-the-ground feedback we received from maintenance crews and engineers in power plants, chemical facilities, food processing plants, and similar operations. They told us what they were tired of: hoses that swell at the cover, couplings that blow off, and tubing that hardens and cracks after just a few months. That’s exactly what this hose is built to prevent. We keep a range of standard diameters in regular production and can supply hose assemblies complete with the right end fittings. If you are currently specifying steam hose for a project or need to replace a failing line, get in touch with your parameters — we’ll provide technical advice, a sample if needed, and a clear quotation so you can order with confidence.
This High-temperature Resistant Industrial Steam Hose is designed to solve three persistent problems with steam lines: safety risks from sudden bursts, uneconomically short service life, and difficulty fitting into existing pipework. It operates reliably across a wide temperature range from -40 °C to 220 °C and at working pressures of 1.0 to 2.0 MPa, helping users cut maintenance costs by roughly 30%. By combining consistent manufacturing quality with a willingness to customize, we aim to be a practical, long-term partner for industrial high-temperature piping — not just a one-time supplier.
Chemical and petrochemical: Reactor heating, distillation column tracing, and high-temperature cleaning lines.
Power and boiler: Boiler steam supply, turbine auxiliary piping, and condensate recovery systems.
Metallurgy and steel: Steam hammers, hot rolling equipment, and casting mold preheating.
Food processing: Sterilization, cooking equipment, and sanitary steam transfer.
Pharmaceutical: Process heating, clean steam delivery, and equipment high-temperature washdown.
High-temperature cleaning equipment: Supply hoses for industrial pressure washers and steam cleaners.
The EPDM inner tube handles continuous service from -40 °C to 220 °C and can withstand short-term peaks up to 240 °C. This covers the vast majority of plant steam conditions, including saturated and mildly superheated steam where specified.
Two layers of high-strength steel wire braid provide a working pressure range of 1.0 to 2.0 MPa, with a burst pressure at least 4 times the rated working pressure. The structure resists pressure surges and helps prevent blowouts.
A specially formulated outer cover resists ozone and aging. Under outdoor use, aging rate is cut by about 35% compared to standard covers. The cover surface temperature stays below 60 °C in normal operation, making contact handling safer for workers.
The hose can be bent to a radius of 150 mm or less without kinking, allowing it to fit into tight equipment layouts. Installation time is typically reduced by about 40%, saving on labor and simplifying piping runs.
Under normal rated conditions, service life is 12 months or more, roughly 50% longer than ordinary steam hose. This translates directly into fewer replacement cycles and less production downtime.
|
Parameter |
Specification |
|
Pressure Rating |
1.0 MPa, 1.6 MPa, 2.0 MPa (selectable) |
|
Inner Diameter Range |
10 mm – 76 mm (custom from 6 mm to 100 mm) |
|
Standard Length |
1 m – 100 m (commonly supplied as 20 m per length) |
|
Construction |
Inner tube: EPDM; Reinforcement: steel wire braid; Cover: aging-resistant synthetic rubber |
|
Temperature Range |
-40 °C to 220 °C (short-term 240 °C) |
Never exceed the rated temperature and pressure. Keep the hose away from oil and grease, which can accelerate EPDM aging. Avoid cuts and abrasions from sharp objects, and do not bend tighter than the minimum bend radius. Inspect the hose body and couplings regularly, and replace any assembly that shows damage.
Drain condensate from the hose after each use to prevent internal corrosion and weakening. Store the hose in a cool, dry area out of direct sunlight and away from strong acids and alkalis. Routine checks on cover condition and coupling tightness will help you get the full working life out of the hose.
Q: What is the minimum order quantity?
A: The regular MOQ for standard sizes is 50 meters. We also support smaller trial quantities if you want to test the hose under your actual steam conditions before placing a bulk order.
Q: Is this hose suitable for superheated steam?
A: It is designed primarily for saturated steam and hot water up to 220 °C continuous. It can handle short-duration superheated steam up to 240 °C, but if you need continuous superheated steam service, please share your exact temperature and pressure parameters with us. We’ll advise on material suitability and realistic expected life.
Q: Can you supply complete hose assemblies with fittings?
A: Yes. We can provide the hose assembled with flanges, threaded ends, quick couplings, or other fittings matched to your steam equipment. Just specify the connection type and size when you enquire.
Q: What warranty do you offer?
A: We provide a 12-month factory warranty under normal operating conditions. If a quality defect occurs, we will arrange a replacement free of charge.
Q: How quickly can you deliver after an order is placed?
A: Standard sizes that we keep in stock can usually ship within 3–7 days. Custom lengths, diameters, or fitted assemblies may take a little longer, and we’ll confirm the exact lead time with your quotation.
Q: Do you offer OEM and custom branding?
A: Yes, we can print your company logo on the hose cover and provide customized packaging. We also support custom inner diameters, pressure ratings, and color preferences.
Q: How can I request a sample or get a quotation?
A: Simply send us an email or give us a call. Tell us your required inner diameter, working pressure, length per piece, and fitting type if needed. We’ll get back to you with a detailed quote, and we can arrange a free sample for your evaluation. Hengshui Zhehan is here to help you get the right steam hose — not just any hose.
Address
No. 7126, Zhanggehou Rubber & Plastic Base, Jingzhou Town, Jing County, Hengshui City, Hebei Province, Chinaa
Tel
