Standard sandblasting hoses lack sufficient abrasion resistance and pressure capacity. Under high-velocity abrasive impact, they bulge and crack easily, and frequent replacements drive up project costs.
Hengshui Zhehan Rubber & Plastic introduces the high-strength fabric-reinforced rust removal sandblasting hose, combining a multi-layer fabric skeleton with a highly abrasion-resistant rubber inner tube. It withstands high-speed sand scouring and delivers burst-free performance under high-pressure delivery.
For steel structure or shipyard sandblasting procurement needs, contact us for samples and bulk quotation of our high-strength fabric-reinforced rust removal sandblasting hose.
Resolves the shortcomings of ordinary market sandblasting hoses — low abrasion resistance, short service life, and breakage/leakage under high pressure — substantially reducing downtime for hose replacement and lowering consumables costs.
Compatible with all types of dry rust removal blasting equipment. The fabric reinforcement layer evenly distributes internal pressure, eliminating blowout hazards and supporting stable blasting operations in both workshop and outdoor settings.
Hengshui Zhehan Rubber & Plastic custom-manufactures high-strength fabric-reinforced rust removal sandblasting hoses to meet anti-corrosion and descaling delivery needs across shipbuilding, steel structure, and machinery manufacturing industries in a single, integrated supply.
Steel Structure Engineering: Used for rust removal blasting on factory steel frames, bridge supports, and tower crane components. Handles long-distance delivery of high-pressure garnet and quartz sand abrasives.
Ship Repair and Construction: Applied to hull decks, cabin steel plates, and marine component refurbishment and descaling. Performs reliably in outdoor coastal salt-spray sandblasting environments.
Machinery and Foundry: Cleans oxide scale on large castings, stamped parts, and mold surfaces. Supports continuous, high-volume delivery of hard abrasives for production-line operations.
Infrastructure Anti-Corrosion: Used for pre-treatment of internal and external surfaces of pipelines, storage tanks, and pressure vessels. Compatible with mobile job-site blasting equipment setups.
The hose body distributes pressure evenly, with burst pressure rated at three times the working pressure or higher. The high-strength fabric-reinforced rust removal sandblasting hose reliably handles 0.6–0.8 MPa blasting pressure without bulging or delamination.
Resists continuous high-velocity sand scouring. Abrasion loss is reduced by 62% compared to standard sandblasting hoses, and continuous per-hose service duration is extended by 2.8 times.
Withstands outdoor sunlight, coastal salt spray, and weak acid/alkali descaling environments without aging or cracking. Performs reliably across a -35°C to +70°C temperature range for long-term outdoor service, extending outdoor service life by 50%.
High-pressure reciprocating bending and dragging friction do not cause inner/outer layer separation. On-site drag-related wear and damage rates drop by 75%, reducing abrasive leakage loss and safety incidents.
The hose body features a tight bend radius, enabling maneuverability in confined ship cabins and steel structure gaps. A single worker can drag and lay it out, improving installation efficiency by 30% and reducing manual handling burden.
|
Parameter |
Standard Specification |
|
Pressure (Working / Burst) |
0.8 MPa / 2.4 MPa |
|
Standard Inner Diameters |
19 mm, 25 mm, 32 mm, 38 mm, 51 mm |
|
Standard Length per Piece |
20 m / 40 m (custom cutting available) |
|
Construction |
Inner tube: High-abrasion rubber; Reinforcement: Multi-layer chemical fiber fabric; Outer cover: Weather-resistant rubber |
|
Operating Temperature |
-35°C to +70°C |
1. Never exceed the 0.8 MPa rated working pressure when using the high-strength fabric-reinforced rust removal sandblasting hose. Overpressure can cause immediate hose rupture and flying abrasive injury.
2. Before each shift, inspect the hose body for cracks, bulges, and debonding damage. Damaged hose must not be put into blasting service to prevent high-pressure abrasive leakage.
3. Both ends of the line must be secured with purpose-built hose clamps. Simple wire binding is not acceptable, as it cannot prevent end disconnection under high-pressure delivery.
4. During operation, prevent the hose from being run over by forklift or crane wheels. Place protective padding over sharp steel structure edges to avoid cutting the hose wall.
1. Flush residual sand from the hose interior after each job. Accumulated hard abrasive continuously wears the inner rubber and shortens service life.
2. Store in a cool, dry warehouse away from strong acids/alkalis and open heat sources. Prolonged sun exposure accelerates outer cover aging.
3. Minimize sharp bending and twisting during dragging operations. Persistent torsion damages the internal fabric reinforcement and degrades the hose's pressure and abrasion performance.
Q: What is the minimum order quantity?
A: Standard stocked specifications have a minimum order of just one piece. Larger engineering project orders can be adjusted as needed, and custom length cutting is supported.
Q: Do you offer OEM customization options?
A: Yes. We can print company logos, produce custom inner diameters and lengths, and modify the abrasion layer compound formulation to match specific blasting equipment and operating conditions.
Q: What warranty terms apply?
A: Under normal operating conditions and proper use, non-human-caused damage is covered by a 6-month warranty. Material quality issues are resolved with free replacement hose.
Q: Can this hose be used with wet blasting or slurry applications?
A: This hose is designed primarily for dry abrasive blasting. For wet blasting or slurry applications, we recommend consulting our technical team first — we can recommend a suitable alternative formulation for water-based abrasive delivery.
Q: How do I select the correct inner diameter for my blasting setup?
A: The right size depends on your blast pot capacity, nozzle size, and required abrasive flow rate. Share your equipment specifications with us, and we will recommend the optimal inner diameter to maximize efficiency and hose life.
Q: Do you supply matching fittings and couplings?
A: Yes. We can supply the hose with pre-assembled end fittings and couplings matched to your equipment, ready for installation upon delivery. Let us know your connection type and we will include fittings in your quotation.
Q: Is factory inspection available?
A: Yes, we welcome on-site factory visits and audits. Contact our sales team to schedule a visit to our production facility.
Hengshui Zhehan Rubber & Plastic Products Co., Ltd. specializes in the R&D and manufacturing of sandblasting hoses and rubber hoses. For samples, technical data sheets, or project quotations, reach out by phone or online customer service. We support on-site factory inspections and are ready to assist with your specific application requirements.
Address
No. 7126, Zhanggehou Rubber & Plastic Base, Jingzhou Town, Jing County, Hengshui City, Hebei Province, Chinaa
Tel
