Hengshui Zhehan Rubber & Plastic focuses on hose construction that keeps industrial fuel transfer safe and economical. By pairing proven braided reinforcement with compounds formulated specifically for petroleum-based fuels, this gasoline transfer hose resists the softening, hardening, and embrittlement that ruin ordinary rubber. It maintains stable performance under continuous pressure, repeated flexing, outdoor exposure, and wide temperature swings—helping you cut maintenance overhead and keep equipment in service.
Engineered for diesel and gasoline transfer, this oil and corrosion resistant braided hose combines a nitrile (NBR) inner tube with a multi-layer high-strength polyester braid. It reliably resists fuel, corrosion, and deformation, stays flexible in demanding conditions, and handles working temperatures from -30°C to 120°C. Designed as an industrial oil braided hose, it is widely used on construction machinery, tank trucks, chemical process lines, and vehicle fuel systems where consistent, leak-free fuel delivery is non-negotiable.
Standard general-purpose hoses often swell, crack, or leak when exposed to diesel and gasoline. Low pressure ratings, fast aging, and sudden ruptures lead to repeated replacement, unexpected downtime, and safety risks.
This Oil-resistant and Corrosion-resistant Braided Hoses for Diesel and Gasoline Transportation replaces vulnerable tubing with a dedicated oil-resistant nitrile lining and a tightly braided reinforcement jacket. The result: no swelling, no corrosion-driven cracking, higher working pressure, and a far longer service interval. For a fuel transfer hose that eliminates frequent change-outs, this design offers a direct, factory-supplied answer—available with custom diameters, lengths, and pressure ratings to match your equipment exactly.
Used on excavators, loaders, rollers, and similar heavy equipment for diesel supply and return lines. Withstands high-frequency vibration, tight bending, and constant movement without kinking or leaking.
Fits diesel and gasoline loading/unloading operations on tank trucks, depot transfer lines, and mobile refueling rigs. Handles outdoor exposure, UV radiation, and typical transfer pressures without degradation.
Installed on compact chemical equipment and process modules that convey light fuel oils. The oil-resistant inner layer protects against chemical attack from refined fuels, ensuring seal integrity during continuous duty.
Works on tractors, harvesters, and onboard fuel routing. Tolerates outdoor temperature shifts, rough terrain flexing, and prolonged contact with diesel and gasoline, solving the ageing and leakage issues common with low-grade hose.
The inner NBR compound resists diesel and gasoline more than four times longer than generic rubber in sustained immersion. No softening, no cracking, no seepage—this oil and corrosion resistant braided hose keeps fuel inside the line.
Multi-layer polyester braid distributes stress evenly. Working pressure range: 1.0–4.0 MPa; burst pressure is 3–4 times the working pressure. Even under pressure surges, the hose body won’t bubble or burst.
The hose readily handles tight routing and equipment motion. Tested for over 100,000 dynamic flex cycles without delamination or cracking—ideal for articulated machinery and confined installations.
A weather-resistant synthetic rubber cover shields against ozone, UV, and oxidation. In outdoor, exposed applications, service life is extended by more than 60% compared with standard hose covers.
Uniform wall thickness, smooth bore, and cleanly cut ends provide reliable coupling retention and low flow resistance. Compatible with common hose fittings, this industrial fuel delivery hose integrates easily into existing diesel and gasoline systems.
|
Parameter |
Specification |
|
Working pressure range |
1.0–4.0 MPa (burst pressure: 3–4× working pressure) |
|
Inner diameter |
6 mm–102 mm (non-standard sizes available on request) |
|
Standard lengths |
20 m/roll, 50 m/roll; custom cut lengths can be supplied |
|
Construction |
Inner: NBR oil-resistant rubber |
|
Temperature range |
-30°C to 120°C |
Inspect for cuts, cracks, blisters, or delamination. Never exceed the rated working pressure or temperature limits. During installation, avoid twisting, kinking, and contact with sharp edges. Keep the hose away from open flames and strong chemical agents.
Minimize continuous direct sunlight and water submersion. When not in use, drain fuel residues, clean the outer cover, and store the hose flat in a dry, ventilated space. Periodically check coupling tightness and the hose body for signs of ageing; replace sections that show hardening, deep cracks, or deformation.
This hose is intended for diesel, gasoline, and similar light petroleum-based fuels only. Do not use it with strong acids, alkalis, or aggressive solvents—such media will damage the rubber and compromise safety.
Q: What’s the minimum order quantity?
A: For standard specifications, the MOQ is typically one roll. Bulk orders qualify for tiered discounts, and stock sizes can ship the same day.
Q: Can I get custom sizes or print our logo on the hose?
A: Absolutely. We provide OEM services including special inner diameters, custom cut lengths, cover colours, and logo printing. We can also adjust pressure ratings and temperature parameters based on your equipment requirements.
Q: How do you ensure consistent quality?
A: All hoses are manufactured to national standards and tested for pressure resistance and material integrity before dispatch. We back them with a 12-month warranty covering material and workmanship defects under normal use.
Q: Are samples available for evaluation?
A: Yes, sample lengths of our oil and corrosion resistant braided hose can be arranged so you can verify compatibility and quality before placing a volume order.
Q: What fuels can this hose handle, and what should be avoided?
A: It is designed for diesel, gasoline, and light fuel oils. It is not suitable for strong acids, alkalis, or strong organic solvents—using those will damage the hose and void the warranty.
Q: How soon can I receive my order?
A: Stock items usually ship within 1–3 working days. Custom-made hoses vary based on specification; we’ll confirm the exact lead time when you inquire.
Contact Hengshui Zhehan Rubber & Plastic today for a sample, a quotation, or technical selection support. With years of specialized experience in oil-resistant hose manufacturing, we’ll help you build a fuel line setup that lasts—and ship it directly from our facility with the exact specs your operation demands.
Address
No. 7126, Zhanggehou Rubber & Plastic Base, Jingzhou Town, Jing County, Hengshui City, Hebei Province, Chinaa
Tel
